A new purchased (or older) Canon printer needs to be set up. First, ensure you’ve installed the latest drivers and software from a valid site, for example – ij.start.cannon or https //ij.start.cannon and http //ij.start.cannon. The wireless and wired models require drivers and software; therefore, each has to undergo one important installation process. If your printer model isn’t set up yet, you can get started now. Ij.start.cannon offers a type of printer including PIXMA, SELPHY, MAXIFY, etc. canon.com/ijsetup has some factors need to be in mind while choosing an inkjet printer for you.
Firstly, download and install your printers driver from ‘canon page’.
Thereafter, ensure that your canon printer is plugged in power switch and make sure that it is turned ON.
Next, open the downloaded file of driver setup and click on next till the time you see screen where you see option of choosing “Wireless Setup”.
Now after selecting the wireless option, go to your Canon printer screen and tap on WiFi setup button.
Select the device settings and click on OK.
Next, Choose Device Settings>LAN Settings and press ‘OK’ button.
Then, open ‘LAN settings’ and select ‘Wireless Lan Setup’ option and press OK. Now your printer will search for access point
Make sure that your WiFi router is turned on. Now, WiFi flash lamp will blink on the printer.
Next, a network list will appear on the screen. Select your WiFi network from the list and press on ‘OK’.
Now it will ask for your WPA/WEP key (WiFi password). Enter your correct password here and press on ‘OK’ button
In a few moments your printer will connect to WiFi network.
Hence, by using the above steps you can easily complete Canon ij wireless setup for your Windows system.
Regards,
J Wick
